Back

Volume 43 , Issue 3
May/June 2023
Pages e133–e139

Fracture Resistance of the Bundle Post System and Conventional Fiber Post with Different Lengths

İlhan Altınsoy, DDS, PhD/Ulviye S. Buyukkaplan, DDS, PhD/Deniz Yanık, DDS, PhD/Nurullah Turker, DDS, PhD

DOI: 10.11607/prd.6399

This study compares the fracture strength of teeth restored with conventional round fiber post (CP) and bundle post (BP) in two different lengths. A total of 48 mandibular premolars were selected. Endodontic treatment was performed, and the premolars were divided into four groups (n = 12 per group): Group C9 = 9-mm CP; Group C5 = 5-mm CP; Group B9 = 9-mm BP; Group B5 = 5-mm BP. Post spaces were prepared, and posts were disinfected with alcohol. Silane was applied, and posts were placed with self-etch dual-cure adhesive. The core structures were created using dual-cure adhesive and standardized core-matrix. Specimens were embedded in acrylic, and the periodontal ligament was simulated with polyvinyl-siloxane impression material. Thermocycling was performed, and specimens were then loaded at a 45-degree angle to the long axis. The failure mode was analyzed with ×5 magnification, and statistical analyses were performed. No statistical difference was found between post systems and post lengths (P > .05). Chi-square test revealed no statistical difference in the failure mode (P > .05). BP did not affect fracture resistance compared to CP. For the restoration of extremely irregular canals with a fiber post, BP can be used as an alternative system because it does not reduce the fracture strength. If necessary, longer posts can be used without decreasing the fracture resistance.

Full Text PDF File | Order Article

 

 

Adobe Acrobat Reader is required to view PDF files. This is a free program available from the Adobe web site.
Follow the download directions on the Adobe web site to get your copy of Adobe Acrobat Reader.